Recently, the United States Department of energy (DOE) released on the overall CRI LED cold light source test procedures of the federal register. The requirements to enter the United States CRI cold light source must be tested for medical CRI LED cold light source according to the related test program requirements in a qualified laboratory, to obtain CRI cold light source r total cold light flux, input power, luminous efficiency, color temperature, color index, power factor, and life standby power data.

We are focus on the special LED and application module on the medical lighting and UV market.please contact us:kevin@sunerled.com or http://www.sunerled.com/English/

The legislation came into effect in December 28, 2016 and enforced in August 1, 2016. According to the requirements of the CIR LED cold light source code, the test of the above parameters need to be carried out according to the standard of LM-79, LM-84, TM-28 and IEC6 2301, respectively.

In addition, since August 1, 2016, the LED Lighting DOE control Facts label (color label) will be suspended to submit to accept the new alternative to Lamps all, because the integrated medical CRI LED cold light source new test program: DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 [Docket No.EERE - 2011 - BT - TP 0071] came into effect on August 1, 2016. Moreover, DOE is about to be in the form of non - integrated high - color cold light source to formally release non - integrated CRI LED cold light source test program.

Any submission in August 1, 2016 before the listing application will continue to deal with. In view of the current listing has received medical CRI LED cold light source products remains in the network database in Database. Lighting Facts LED working group will be the latest DOE requirements for further investigation and research, if there is a final decision will immediately notify all partners.

LED Lighting Facts DOE will continue to accept the CRI LED cold light source lighting and renovation kit submitted.

DLC has also revised its requirements on the CRI cold light source, starting in August 1, 2016, will no longer require the submission of bare LM-79 data to Lighting Facts LED. Please note that DLC will continue to accept the application for certification of the lamp tube. This change does not affect the requirements of DLC for medical CRI LED cold light source for other categories of products.

About LED Lighting Facts DOE:

DOE LED Lighting Facts DOE LEDSSL is the United States Department of energy for solid general lighting products (including: integrated LED lamp, LED lamp, non integrated medical CRI LED cold light source, high color, CRI LED cold light source renovation Kit) voluntary energy label certification program. Through this project, LED manufacturers can submit samples in the laboratory authorized according to IESNALM-79-08 industry standard test, after submitting the report to obtain medical CRI LED cold light source column name, thus showing its excellent product performance.

North America, the latest standard Express - UL 1993 standard update

At present, with the increasing number of medical CRI LED cold light source, CRI cold light source, CRI LED cold light source and other new products, the introduction of new products, UL according to new products, new technology to update the relevant technical requirements of the standard. The latest requirements of UL certification for CRI LED cold light source products and the update of the UL 1993 standard

We are focus on the special LED and application module on the medical lighting and UV market.please contact us:kevin@sunerled.com or http://www.sunerled.com/English/